24 You Must Try Water Heater Lines Backwards

---

Water heater lines backwards. I have had heater installations in previous homes where the water lines to the heater were fixed pipes attached to the heater without flexible couplers. A 30 gal heater is a size small. In order for this to happen however without crisscrossing the pipes between the wall and the heater the pipes would have to be reversed inside the wall.

All because the water heater was plumbed incorrectly backwards. If the dip tube becomes faulty or is removed the hot water from the tap will run out quickly. The cold water dip tube takes the cold water from the connection at the top of the tank to the bottom of the tank where it is heated.

water heater lines backwards

You Must Try Water Heater Lines Backwards

The hot supply will be taken from the bottom of the tank where the water is cooler. Fip x 18 in. Two electric 52 gal water heaters plumbed in series cold water supply to one then out to 2nd wh then out to hot supply for house.

What puzzled me was that the incoming cold water supply was attached to the hot connection on both water heaters and the feeder line to the house was attached to the cold labeled connection in on the water heater. Failure of dip tubes is common especially with water heaters from the mid 90s. The cold water that supplies the tank is going into the side marked with an h ontop of the tank and the hot water is comming out of the side marked with c ontop of the tank.

Long story short it looks like the people who installed our water heater put the water lines in backwards. Braided stainless steel water heater connector with integrated ball valve model u3068flex18bvlf 107. The cold water will be entering at the top of the heater and diluting the hot water.

Water heater lines backwards. As such without it being a big plumbing project it was far more convenient to redo the coupler pipes directly. After correctly installing a new 50 gallon electric water heater a friend and i re plumbed all hot lines under the house cleaned all fixtures with clr replaced all shut off valves checkedreplaced all fixture supply lines. There is one sut off and it is the line that supplies the hot..

Reverse plumbing a water heater will definitely affect the amount of hot water that you get from the heater. The anode rod is there to catch sediments and help prevent wear on the tank itself. Inspect mobile llc found the water lines connected to this water heater were backwards. Water heater lines backwards.

Image Source: Google Images

Popular Posts